Figure 35. Installing internal PERC riser
Next steps
1
Close the cable guiding latch.
2
Install the air shroud.
3
Follow the procedure listed in
Related link
Installing the air shroud
Removing PERC card from internal PERC riser
Prerequisites
1
Follow the safety guidelines listed in
2
Follow the procedure listed in
3
Remove the internal PERC riser.
Steps
1
Using Phillips #2 screwdriver, remove the screw that secures the PERC card to the internal PERC riser.
2
Pull the PERC card out of the connector on the internal PERC riser.
82
Installing and removing system components
After working inside your
system.
Safety
instructions.
Before working inside your
system.