Return loading of standard programs: deleting of individual operating-times
Push for approx. 3 seconds
Enter operating times level
Select
default time
accept
heating
Select
circuit
Example: direct heating circuit HC
we 21 . AuG.'02
Standard display
15:30
3sec
timeprograms
accept
default time
timeprograms
Hc
default time
default time
Hc
Mc1
When doing this operation the operating times programs which were
°C
62.5
changed will be definitely lost and replaced by the standard programs
indicated in the tables below.
Modify - exit:
Confirm selected flashing value by pressing the knob. Then set the
new required value via knob and take over by pressing it again.
Re-entry into the former step in done by pressing the button
, exit into the standard display via the button
after 60 seconds.
Note: Turn the knob till displaying "Default time"
default time
Mc2
programs.
default time
default time
dhw
all
Page 18
or automatically
Circuit(s) in wich the
standard program is
reloaded