Immergas VICTRIX PRO 35 1 I Instructions And Warning Book For The Users page 13

DAY-
HEATING START
MONTH selected cycle
back forward
TIME-CHANGE HEATING END
SUMMER/WINTER selected cycle
back forward
TEMPERA-
TURE
selected cycle
Selection and modification of parameters and setting values.
OPERATING MODE
Entering into the programming level, principally the OPERATING-TIMES
common (1)
separate (2)
level appears at first.
All other levels, such as
- SYSTEM
back forward
- DOMESTIC HOT WATER CIRCUIT
- DIRECT HEATING CIRCUIT
SUMMER
switching off
- MIXED HEATING CIRCUIT - 1
heating limit
- MIXED HEATING CIRCUIT - 2
- DATE - TIME
back forward
Can be selected directly via knob.
By pressing the knob, the selected flashing level is activated; the first value or
PARA - RESET
resp. parameter appears flashing.
reset to factory
preset
If necessary, it can be modified via the knob and stored by a following touch
onto the knob.
If necessary, the other parameters can be treated in the same way.
back forward
Re-entry into the level selection is done via the info button
the standard display via the program-selection button
after approx. 60 seconds.
For further information see page 20.
, re-entry into
or automatically
Page 13