Kf4-We - Pyronix Enforcer 32-WE Wireless Setup Manual

9.5 KF4-WE

LEARNING FROM
DEFAULT
<2s
CHANGE CODES?
Add New User?
Empty
Enter User Code
[
RE-LEARNING
>10s
LEDs
1) General LEDs
(i) From power up:
Not learnt
(ii) Learning process
9.5.1 Technical Specifications
Operation: Button Configurations (all programmable):
, , I, II, +, I+II, +I, and +II.
Button Actions: Show status, Arm/Set area, Disarm/Set area, Latch output, Timed output and
Personal Attack.
Battery: Battery: 1 x CR-1/3N Li-Mn Cell 3.0V (BATT-CR1/3N).
Threshold: 2.1V +/- 5% at 25°C. Life: Up to 2 Years.
Wireless:
Transmission Frequency: 868MHz, FM Transceiver Narrow Band. Transmission Method: Fully
encrypted rolling code
Code combinations: 4294967295.
Materials and Environment
Indication: LEDs (Red, Green, Amber)
Temperature: Storage:-20°C to 50°C. Certified:-10°C to 40°C. Nominal:-10°C to 50°C.
Dimensions (H x W x D): 72 x 30 x 20mm. Weight: 28g
Compatible with the Enforcer 32-WE, PCX and EURO commercial control panels (using the
Wireless Expander).
Enforcer 32-WE Wireless Setup Manual
>5s
[01]
]
REPLACING THE BATTERY
(iii) 8 x flashes: Learnt
(iv) Fast flashing: Unlocking
(v) Fast flashing: Locking
(vi) 18 x Slow flashes (10 secs):
Fault with new battery installed
(vii) 6 x Flashes: Alarm
(when checking status)
Page: 22
DELETING
CHANGE CODES?
Add New User?
Delete/Change
User?
Delete User?
User Name
Keyfob
_
Enter User Code
Select Button
Lock [1]
Button Action[2]
Enter User Code
Set Area
2) Arming/Disarming LEDs
(i) Arming
(ii) (Amber)
4 x Flashes: Fault
1 x Flash: Key pressed
(iii) Armed
(iv) Disarmed
[01]
[******]
[ ]