Table of Contents
Advertisement
D-Link DAP-2622 User Manual
Wireless Client Mode
Wireless Band:
Select either 2.4 GHz or 5 GHz from the drop-down
menu.
Mode:
Wireless Client is selected from the drop-down menu.
Network Name (SSID):
Service Set Identifier (SSID) is the name designated for a
specific wireless local area network (WLAN). The SSID' s
factory default setting is dlink. The SSID can be easily
changed to connect to an existing wireless network.
Auto Channel Selection:
Enabling this feature automatically selects the channel
that will provide the best wireless performance. This
feature is not supported in Wireless Client mode.
Channel:
The channel used will be displayed, and matches the
AP that the DAP-2622 is connected to when set to
Wireless Client mode.
Click the drop-down menu to select 20 MHz, Auto
Channel Width:
20/40 MHz or Auto 20/40/80 MHz. Select 20 MHz
if you are not using any 802.11n wireless clients.
Auto 20/40 MHz allows you to connect to both
802.11n and 802.11b/g or 802.11a wireless devices
on your network.
Site Survey:
Click on the Scan button to search for available
wireless networks, then click on the available network
that you want to connect with.
Authentication:
Will be explained in the next topic.
Check the box to enable the Wireless MAC Clone
function.
Click the drop-down menu to select Auto or Manual.
18
Advertisement
Table of Contents
