Wireless Client Mode - D-Link NUCLIAS CONNECT DAP-2680 User Manual

Web User Interface
Wireless Band Click the drop-down menu to select the wireless
band, 2.4GHz or 5GHz.
Mode Click the drop-down menu to select Wireless
Client.
Network Name (SSID) Enter the name of Service Set Identifier (SSID)
up to 32 characters and is case-sensitive.
SSID Visibility
This option is unavailable in Wireless Client
mode.
Auto Channel Selection
Click the drop-down menu to select the desired
channel. The function is only available when
Auto Channel Selection is Disable.
Note: The wireless adapters will automatically
scan and match the wireless settings.
Channel The channel used will be displayed, and
matches the AP that the DAP-2680 is connected
to when set to Wireless Client mode.
Channel Width Click the drop-down menu to select 20 MHz,
Auto 20/40 MHz or Auto 20/40/80 MHz.
Select 20 MHz if you are not using any 802.11n
wireless clients. Auto 20/40 MHz allows you
to connect to both 802.11n and 802.11b/g or
802.11a wireless devices on your network.
Site Survey Click Scan to search for available wireless
networks, then click on the available network
that you want to connect with.
Authentication
Will be explained in the next topic.
Enable
Check the box to enable the Wireless MAC Clone
function.
MAC Source Click the drop-down menu to select Auto or
Manual.
D-Link DAP-2680 User Manual

Wireless Client Mode

18