Preparing For Configuration; Changing The Login Account - Johnson Controls P2000 Configuration

C O N F I G U R I N G P 2 0 0 0 R E G I O N A L S E R V E R
This chapter describes how to establish a P2000 regional server as a Database Subscriber.
The P2000 prerequisites and software must be installed before proceeding.
When configuring the P2000 regional server you need to ensure that the information
originally provided when configuring the P2000 central server is available to you. We
therefore recommend that you ask the administrator of the P2000 central server to send you
the information recorded when configuring the central server.
Before performing procedures described in this chapter, make sure you
!
completed the instructions in
backup the P2000 database and stop P2000 services on the regional server.
CAUTION
P
REPARING FOR
You will begin with creating a new Windows account with administrator rights on the P2000
regional server(s), using the same Windows account name and password as used on the
P2000 central server (see Table 2-1 for reference). You will:
Create a new Windows account

Assign administrator rights to it

Log in with the new psqlserver login name

Instructions are the same as for the central server. Please refer to the "SQL Server Login
Account" section on page 2-2.
Afterwards, continue with "Changing the Login Account."
C
HANGING THE
 To change the login account for the SQL Server:
1. Go to Start>Programs>Administrative Tools>Services.
2. Right-click the SQL Server (MSSQLSERVER) icon and select Properties.
24-10515-21 Rev. –
This document contains confidential and proprietary information of Johnson Controls, Inc.
© 2010 Johnson Controls, Inc.
Chapter 3: Merging Data Between Sites
C
ONFIGURATION
L A
OGIN CCOUNT
4
Chapter
. Then,
4-1