Johnson Controls P2000 Configuration page 42

Configuring P2000 Central Server
5. In the lower window pane verify that the commands were completed
successfully.
6. Click the New Query button.
7. Type in the following command:
exec dbo.spP2000ReplicationSetAllTablesIDRange XX, YY
Where XX is the beginning of the ID range, and YY is the end of the ID range.
See Table 2-1 for reference.
8. Click the "Parse Query" button
9. Click the ! Execute button.
It is recommended that you scroll down and review error messages under the
Messages tab. Resolve any reported problems before proceeding.
10. Close the Microsoft SQL Server Management Studio window.
Congratulations, you have successfully defined the required publications for your
P2000 Enterprise Solution.
2-28
to check integrity of the script.
This document contains confidential and proprietary information of Johnson Controls, Inc.
Enterprise Configuration
24-10515-21 Rev. –
© 2010 Johnson Controls, Inc.