Johnson Controls P2000 Configuration page 15

C O N F I G U R I N G P 2 0 0 0 C E N T R A L S E R V E R
Prior to configuring the central server, install the P2000 prerequisites and software (see the
P2000 Server/Workstation Software Installation Manual for details) and backup the
databases.
The steps within this section will tell you how to:
Assign a new Microsoft

Configure the central site's database server as Distributor and Publisher

Establish the P2000 Publications

Create snapshots for all P2000 Publications

Use the following tables for reference during P2000 Central and Regional Sites
configuration:
Item
P2000 Server name*
Windows account name**
Windows password
SQL server name*
SQL administrator account**
SQL administrator account password
Replication Set Identity Range***
* The name has to be unique within the Enterprise system.
** Choosing different settings may impact the setup of your server. It is recommended that you use the factory
settings, or contact Technical Support for assistance.
***Each ID range should be unique within the Enterprise system and cannot be re-used. If you need to re-assign
the server's ID range, use a new range.
24-10515-21 Rev. –
This document contains confidential and proprietary information of Johnson Controls, Inc.
© 2010 Johnson Controls, Inc.
®
Windows account to the MS SQL Services
Table 2-1: Central Site Settings
Factory Settings
CENTRAL
psqlserver
Master1
CENTRAL
sa
Master1
10,000,000 to
20,000,000
2
Chapter
Customer Settings
2-1