Replication Set Identity Range - Johnson Controls P2000 Configuration

Configuring P2000 Central Server
4. Click Close.
5. The status will change from "The agent has never been run" to "Starting
Agent" and to "100%."
Wait for the snapshot to complete (as indicated by the "100%" status). The
process may take several minutes.
6. For each publication, run its associated snapshot agent as described in steps 3
and 4. Snapshots should be run one at a time.
The number of snapshots depends on the number of previously established
publications. Some snapshots may take several minutes to complete.
7. When all snapshots are completed, it is recommended that you backup the
databases.
R S
EPLICATION ET
 To set up identity range:
1. Click the "Open File"
Studio window or go to File>Open>File.
2. Browse for the following file: 
C:\Program Files\Johnson Controls\CARDKEY P2000\sql\
P2000EntityConfig_spP2000ReplicationSetAllTablesIDRange.sql
Select it and click Open.
2-26
Completed snapshot
I R
DENTITY ANGE
button in the Microsoft SQL Server Management
This document contains confidential and proprietary information of Johnson Controls, Inc.
Enterprise Configuration
24-10515-21 Rev. –
© 2010 Johnson Controls, Inc.