Table of Contents
Advertisement
7.5
Crutch support
This accessory holds crutches on the wheelchair without interfering with its normal use.
Put the ends of the crutches into the cup A and fasten their upper ends using the strap B fixed to the backrest post.
You can easily remove the post with the cup by pressing the pin D and sliding the post off the support.
To fit the post with the cup, insert the post into the support C until the pin D touches the support itself. Then, press the pin and slide the post in until the pin locks in the support hole.
7.6
Folding push handles
When folded down (1), these push handles reduce the wheelchair's overall volume and
reduce possible interference with the occupant's arms when self-propelling the
wheelchair.
When in the operating position (2), they act just like normal handles.
To fold the handle down (1), press pin A (2), just beneath the handle and swing the
handle down.
The pin remains pressed down (3).
To swing the handle up to the operating position (2), just swing it up until the pin A
automatically locks.
When the assistant moves the wheelchair with the occupant sitting on it, make sure the push handles are safely locked in their operating position.
C
D
A
B
1
2
3
A
Joker Energy / Noir 2.0 31
Advertisement
Table of Contents
