Prorack PR3213 Manual

First Time Installation
• Please read instructions carefully before installation.
• Check the contents of kit. Contact your Prorack dealer if any parts appear to be missing or damaged.
• Clean your Tray and roof racks prior to fi tting the Accessory Mounts.
• Use caution when handling rails and slats, sharp edges may be present.
Important Warning
• It is critical that all Prorack racks and accessories be properly and securely attached to your vehicle. Improper
attachment could result in an automobile accident, and could cause serious bodily injury or death to you or to others.
• You are responsible for securing the racks and accessories to your car, checking the attachments prior to use, and
periodically inspecting the products for adjustment, wear, and damage.
• If you do not understand all of the instructions and cautions, or if you have no mechanical experience and are not
thoroughly familiar with the installation procedures, you should have the product installed by a professional installer
such as a roof rack specialist.
Tools Required
• Torque Wrench (optional)
• Screwdriver (optional)
Kit Contents
Item Component
1 Cover
2 M6 Button Head Capscrew 20 mm
3 M6 Washer
4 M6 Spring Washer
5 M8 Washer
6 M8 Spring Washer
7 M8 Button Head Capscrew 40 mm
8 Frame
9 M6 Square Nut
10 Bracket A
11 Bracket B
12 Bracket C
13 Clamp
14 Allen Key 5 mm
15 Allen Key 4 mm Ball End
09-13-572-Rev4
Tray Accessory Mounts
Note - This product is designed to
Qty
work with Prorack Alloy Trays.
2
4
4
4
2
2
2
2
4
4
2
2
2
1
1
PR3213
Page 1 of 4