Prorack PR3208 Instructions

First Time Installation
• Please read instructions carefully before installation.
• Check the contents of kit. Contact your Prorack dealer if any parts appear to be missing or damaged.
• Clean your roof racks and cargo basket prior to fi tting the Gas Bottle Restraint.
Important Warning
• It is critical that all Prorack racks and accessories be properly and securely attached to your vehicle. Improper
attachment could result in an automobile accident, and could cause serious bodily injury or death to you or to others.
• You are responsible for securing the racks and accessories to your car, checking the attachments prior to use, and
periodically inspecting the products for adjustment, wear, and damage.
• If you do not understand all of the instructions and cautions, or if you have no mechanical experience and are not
thoroughly familiar with the installation procedures, you should have the product installed by a professional installer
such as a roof rack specialist.
Contents
Installing Gas Bottle Restraint on to a Heavy Duty Cargo Tray
Go to Page 2
Installing Gas Bottle Restraint on to a Cargo Basket on Prorack Heavy Duty, Trade and
other Heavy Duty Crossbars
Go to Page 3
Installing Gas Bottle Restraint on to a Cargo Basket on Prorack Aero and International
T-Slot Crossbars
Go to Page 4
Kit Contents
Item Component
1 Gas Bottle Restraint Strap
2 Ratchet Strap
3 M10 Eye Bolt
4 M10 Washer
5 M10 Square Nut
6 M10 Spring Nut
7 M8 Set Screw
8 M8 Spring Washer
9 M8 Washer
10 Restraint Clamp with Bump On
11 Restraint Mount
12 M8 Channel Nut
09-13-569-Rev2
Gas Bottle Restraint
Qty
1
1
2
4
2
2
2
2
2
2
1
2
Tools Required
• 13 mm Spanner
• Screwdriver (optional)
1
2
3
11
12
4
5
6
7
8
9
10
PR3208
Page 1 of 5