Lockly VISION Installation Manual page 8

4.5：
Plug the cable that is coming
through the door into the Interior
lock. Make sure you match the
direction of the plug correctly and
matching the red side of
the plug with the red side on the
lock. Secure the connection by
ensuring the snap is inserted tightly.
In case you need to reinstall the lock
and disconnect the cable, make
sure to press the snap to release the
plug before carefully pulling it out.
Do not force to pull the plug as this
may result to lose connection and
damage the lock.
4.6： Before placing the
interior assembly to the
mounting plate, ensure
the thumb turn is vertical.
STEP 4. INSTALLING THE INTERIOR ASSEMBLY
4.7: Place the interior
assembly against the
mounting plate and make
sure the torque blade is
inserted to the thumb turn
shaft.
4.8 Secure the interior
assembly with 2 screws (I)
I（2X）