Lockly VISION Installation Manual page 4

2.1: Deadbolt slit hole must be aligned to the center of the door hole. If not
adjust as shown below:
2.1.1: Wear gloves during adjustment
to prevent pinching your hands)
(b)
（c）
STEP 2. ADJUST DEADBOLT AND INSTALL
（a）
Push the crank
(a) to extend the
deadbolt (b)
Hold the metal
plate (c) and twist
the deadbolt body
(d) clockwise till it
snaps to 2-3/8"
（d）
（c）
To return to default status,
while the deadbolt (b) is
extended, hold the metal
plate (c) and twist the dead-
bolt body (d) counter-clock-
wise till it snaps to 2-3/4"
（d）