Declaration Of Conformity - Proceq Zehntner ZG8000 Quick Start Manual & Product Certificates

Hide thumbs Also See for Zehntner ZG8000:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 8

Declaration of Conformity

Products:
Zehntner Glossmeter Live ZG8000
Proceq Part Numbers:
420 00 500
Manufacturer:
Proceq SA, Ringstrasse 2
8603 Schwerzenbach, Switzerland
We confirm that the Zehntner glossmeter is in conformity with
RoHS, WEEE and the following directives and standards:
Low voltage directive:
2014/35/EU
RoHS directive:
2011/65/EU
Safety requirements:
EN61010-1:2015/IEC61010-1:2010
Electromagnetic compatibility:
RED 2014/ 53/EU/
EN ETSI 300 328 V2.1.1
EN ETSI 301 489-1 V2.2.0
EN ETSI 301 489-17 V3.2.0
IEC 62479:2010/EN 62479:2011
Determined by:
EN61326-1:2013/
IEC61326-1:2012/
Photobiological safety:
2006/25/EC
EN60825-1:2014
IEC 62471:2006
FCC:
CFR47 Part 15
Connection:
Bluetooth Low Energy
Bluetooth module:
Contains FCC 10: WAP 2001
Contains IC ID: 7922A-2001
RoHS:
EN50581:2012
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation. This Class B digital apparatus complies with
Industry Canada RSS standards. To comply with FCC and Industry Canada RF
radiation exposure limits for general population, the transmitter with its antenna
must be installed such that a minimun separation distance of 20 cm is maintained
between the radiator (antenna) and all persons at all times and must not be
collocated or operating in conjunction with any other antenna or transmitter.
Swiss Made Declaration
Products:
Zehntner Glossmeter Live ZG8000
Proceq Part Numbers:
420 00 500
Manufacturer:
Proceq SA, Ringstrasse 2
8603 Schwerzenbach, Switzerland
We confirm that the products named above were developed and manufactured in
Switzerland and fulfill the requirements needed for the declaration "Made in Switzerland"
or "Swiss Made".
The requirements for industrial products are specified in detail in the National Swiss
Trademark Protection Statute (Art. 47-60, MSchG) covering goods and services.
Schwerzenbach, 13.12.2019
Patrick Waller
Chief Operating Officer
Notice
This document (incl. Quick Start Guide and Product Certificates) constitutes an integral
part of Proceq's General Terms and Conditions of Sale and General Terms and
Conditions of Rental, together with any other guideline, precautions, policies and
conditions
which
Proceq
has
www.proceq.com/downloads, as amended from time to time (the Documents). Proceq
reserves the right to change without notice any information, specifications and
recommendations contained in this document and in any of the associated Documents.
You shall observe and be solely responsible for the safe and lawful use of and your own
conduct while using this product, and any consequences thereof. The use and operation
of this product is at your own discretion and risk. Proceq hereby disclaims any and all
loss, liability or damages resulting from or out of your use of the product. Please ensure
you operate and use this product only for purposes that are proper and in accordance
with the instructions given herein together with all safety and health precautions,
applicable laws, rules, regulations, and as provided for in any of the Documents.
made
and
may
make
available
to
you
at

Advertisement

Table of Contents
loading

This manual is also suitable for:

Zehntner 420 00 500

Table of Contents