Declaration Of Conformity - Proceq Original Schmidt Live Quick Start Manual

Declaration of Conformity

Products: Original Schmidt OS8000 / Silver Schmidt OS8200
Products:
Model: N, L, Print N, Print L
Proceq Part Numbers: 340 10 xxx, 340 20 xxx, 341 5x xxx
Manufacturer: Proceq SA, Ringstrasse 2
8603 Schwerzenbach, Switzerland
We confirm that the Original Schmidt OS8000 / Silver Schmidt OS8200 product
is in conformity with RoHS, WEEE and the following directives and standards:
Low voltage directive: 2014/35/EU
RoHS directive: 2011/65/EU
Safety requirements: EN61010-1:2015/IEC61010-1:2010
Electromagnetic compatibility: RED 2014/ 53/EU/
EN ETSI 300 328 V2.1.1
EN ETSI 301 489-1 V2.2.0
EN ETSI 301 489-17 V3.2.0
IEC 62479:2010/EN 62479:2011
Determined by: EN61326-1:2013/
IEC61326-1:2012/
FCC: CFR47 Part 15
Vibration: EN 60068-2-6:2008/
IEC 60068-2-6:2007/
EN 60068-2-64:2009/
IEC 60068-2-64:2009
Connection: Bluetooth Low Energy
Bluetooth module: Contains FCC 10: WAP 2001
Contains IC ID: 7922A-2001
RoHS: EN50581:2012
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
This Class B digital apparatus complies with Industry Canada RSS standards. To comply with
FCC and Industry Canada RF radiation exposure limits for general population, the transmitter
with its antenna must be installed such that a minimun separation distance of 20 cm is
maintained between the radiator (antenna) and all persons at all times and must not be
collocated or operating in conjunction with any other antenna or transmitter.
Schwerzenbach, 20.05.2019
Patrick Waller
Chief Operating Officer
Proceq GP8000, Proceq GP8800
all
393 10 x00, XXX XX XXX
Swiss Made Declaration
Products:
Model:
Proceq Part Numbers:
Manufacturer:
We confirm that the Original Schmidt OS8000 / Silver Schmidt OS8200 was
developed and manufactured in Switzerland and fulfills the requirements needed for
the declaration "Made in Switzerland" or "Swiss Made."
The requirements for industrial products are in detail specified in the National Swiss
Trademark Protection Statute (Art.47-50, MSchG) covering goods and services.
Schwerzenbach, 20.05.2019
Patrick Waller
Chief Operating Officer
Notice
This document (incl. Quick Start Guide and Product Certificates) constitutes an integral part
of Proceq's General Terms and Conditions of Sale and General Terms and Conditions of
Rental, together with any other guideline, precautions, policies and conditions which
Proceq has made and may make available to you at www.proceq.com/downloads, as
amended from time to time (the Documents). Proceq reserves the right to change without
notice any information, specifications and recommendations contained in this document
and in any of the associated Documents.
You shall observe and be solely responsible for the safe and lawful use of this product, as
well as your conduct while using it and any consequences arising thereof. The use and
operation of this product is at your own discretion and risk. Proceq hereby disclaims any
and all loss, liability or damages resulting from or out of your use of the product. Please
ensure you operate and use this product only for purposes that are proper and in
accordance with the instructions given herein together with all safety and health
precautions, applicable laws, rules, regulations, and as provided for in any of the
Documents.
EN
Original Schmidt OS8000 / Silver Schmidt OS8200
N, L, Print N, Print L
340 10 xxx, 340 20 xxx, 341 5x xxx
Proceq SA, Ringstrasse 2
8603 Schwerzenbach, Switzerland