Minimum Vent Configuration - FireplaceXtrordinair 564 GSR2 35K CF Installation Manual

26 Finalizing the Installation

Minimum Vent Configuration


Use 5x8" Diameter Coaxial Vent

The termination must fall within the shaded area shown in the chart. Use the indicated restrictor and
diffuser positions.

One elbow (30° or 45°) may be used on the horizontal run.

HINT: Use minimum vent kit "H" (96200332) from Travis Ind. (additional vent may be required).
NG (Natural Gas)
5 feet (1.5 m)
0 feet
LP (Propane)
5 feet (1.5 m)
0 feet
© Travis Industries
Exhaust Restrictor - Remove (stock)
Intake Restrictor #1 (stock)
Diffuser #1 (stock)
1' (305mm) Vertical Section Attached Directly to Fireplace
Exhaust Restrictor - Remove (stock)
Intake Restrictor #1 (stock)
Diffuser #1 (stock)
2' (610mm) Vertical Section Attached Directly to Fireplace
4/23/2021 - 1552
(for qualified installers only)
Max. 10' (3048mm) Horizontal Section(s)
Min. 3.9" (100mm) Horizontal Section
Max. 10' (3048mm) Horizontal Section(s)
Min. 3.9" (100mm) Horizontal Section
564 GSR2 35K CF