Table of Contents
Advertisement
24
Finalizing the Installation
Intake Restrictor Adjustment
The intake restrictor is located on the back wall of the firebox. To adjust the restrictor, follow the steps
below:
© Travis Industries
(for qualified installers only)
Position # 1 (open)
Loosen the two screws
holding the intake
restrictor in place..
Position # 4 (closed)
Slide the restrictor down
to the lower position and
tighten the screws.
4/23/2021 - 1552
1/4"
Socket
564 GSR2 35K CF
Advertisement
Table of Contents
