Table of Contents
Advertisement
68
Optional Equipment
15 Cover the face of the fireplace and the outlet of the manifold to ensure no construction debris or
sheetrock dust enters the unit.
16 Once all finish work is complete around the outlet of the manifold, install the outlet grill assembly
using the two included screws (one at each end). The grill assembly will overlap finish material
up to 1-1/2" thick. See the fireplace installation manual for finishing details.
NOTE: The manifold opening protrudes 7/16" proud of the framing. The wall may be finished to the
opening if you do not wish to use the grill trim.
CoolSmart TV - Using oval pipe to get past an obstruction
If a situation arises that obstructs
the CoolSmart flex vent runs (such
as getting past a minimum
sideways vent) you may transition
the 5" flex vent to a ridged nominal
6" oval pipe to get past the
obstruction. Transition back to the
5" round flex and continue to the
manifold.
The adapters and ridged pipe
should be factory ovalized, not field
ovalized.
NOTE: All clearances to
combustibles must be
maintained.
© Travis Industries
(for qualified installers only)
5"
7-3/4"
3"
7-3/4"
5"
5"
3"
4/23/2021 - 1552
5" Flex
to CoolSmart
Manifold
5" round to 6"
oval adapter
6" oval
pipe
5" round to 6"
oval adapter
5" Flex
to fireplace
564 GSR2 35K CF
Advertisement
Table of Contents
