Table of Contents
Advertisement
Optional Equipment
8
Grab on to the knockout with pliers and bend it back and forth until the remaining tabs break free.
Discard the knock out plate.
9
Under each knock out plate, you will find a cover plate held in place with (2) ¼" screws. Use a
nut driver or drill with an extension to remove the (2) screws. Reach in and remove the cover
plate. You may discard the plate.
© Travis Industries
(for qualified installers only)
4/23/2021 - 1552
65
564 GSR2 35K CF
Advertisement
Table of Contents
