Appendix; Job-List; Parameter Overview - Setting Ranges - EWM Picomig 180 puls TKG Operating Instructions Manual

11

Appendix

11.1

JOB-List

We recommend using the characteristics for 1.0-mm solid wire electrodes also for the 0.9-mm
solid wire electrodes.
MIG/MAG pulse arc welding can be selected with JOBs 6, 34, 42, 74, 75, 76, 82, 83, 84, 90, 91, 110,
111, 114 and 115. If an attempt is made to set another JOB to pulse, "noP" = "no Pulse" appears
briefly on the display and the machine is reset to default.
11.2 Parameter overview – setting ranges
Parameters/function
099-005545-EW501
17.12.2020
Figure 11-1
Setting range
Appendix
JOB-List
63