Arc Length; Further Welding Parameters - EWM Picomig 180 puls TKG Operating Instructions Manual

5.2.5.3

Arc length

Setting range: -5 V to +5 V
The basic settings are now completed. Other welding parameters have already been set optimally in the
factory; they can, however, be modified to suit individual requirements.
5.2.6

Further welding parameters

• Preselection: Select a MIG/MAG JOB > see 5.2.4 chapter.
Display
099-005545-EW501
17.12.2020
2s
Setting/selection
Gas pre-flow time
Burn-back correction
Design and function
Figure 5-17
Figure 5-18
MIG/MAG welding
2s
35