Pressure Regulator Connection; Shielding Gas Hose Connection - EWM Picomig 180 puls TKG Operating Instructions Manual

Design and function
Transport and installation
5.1.7.1

Pressure regulator connection

Item Symbol
1
2
3
4
• Before connecting the pressure regulator to the gas cylinder, open the cylinder valve briefly to blow
out any dirt.
• Tighten the pressure regulator screw connection on the gas bottle valve to be gas-tight.
• Screw the gas hose connection to the outlet side of the pressure regulator gas-tight.
5.1.7.2

Shielding gas hose connection

Item Symbol
1
• Screw the gas hose connection to the shielding gas connection (inlet) on the machine gas-tight.
26
Description 0
Pressure regulator
Output side of the pressure regulator
Shielding gas cylinder
Cylinder valve
Description 0
Connection thread - G¼"
Shielding gas connection (inlet)
Figure 5-6
Figure 5-7
099-005545-EW501
17.12.2020