Ransburg AEROBELL 268 A13657 Service Manual page 70

Step 44
Push block into port cavities and
install screws. Tighten to 5 lbs/in
(.56 Nm) torque.
Step 45
To remove fiber optic tube
assembly, use the 17mm
hex on the tube and turn
counter clockwise.
Step 46
Unscrew fiber optic sen-
sor from tube. Re-install
by hand until tight.
LN-9282-14
DISASSEMBLY PROCEDURES
(65mm Bell Cup and Shape Air Ring)
Aerobell 268 - Maintenance
67