Step 20
Note: Two (2) locating pins are mount-
ed on the back of the Turbine to insure
proper alignment.
When assembling these pins will easily
insert when the alignment marks are
properly matched.
Step 21
Locate the Fluid Tube and Fluid
Tube Retainer.
Step 22
Remove the Fluid Tube Retainer us-
ing the opposite end of the Fluid Tip/
Tube Removal Tool (A11229-00).
When re-installing, tighten to 65-
75 In.-Lbs. (7.64-8.42 N-m)
LN-9282-14
DISASSEMBLY PROCEDURES
(65mm Bell Cup and Shape Air Ring)
Aerobell 268 - Maintenance
59