Ransburg AEROBELL 268 A13657 Service Manual page 60

Step 14
Remove the Fluid Tip using
the A11229-00 Fluid Tip/Tube
Removal Tool.
† The Threads on the Fluid Tips
are LEFT HANDED.
Step 15
The Fluid Tip should only be
hand tighten when assembled.
Note: There is an O-ring behind
the Fluid Tip. Take care not to lose.
Step 16
Using the Turbine Retaining Ring
Tool (A12088-00) remove the Tur-
bine Retaining Ring.
LN-9282-14
DISASSEMBLY PROCEDURES
(65mm Bell Cup and Shape Air Ring)
NOTE
Aerobell 268 - Maintenance
57