Aerobell 268 - Maintenance
DISASSEMBLY PROCEDURES
(65mm Bell Cup and Shape Air Ring)
Step 9
Note: Two (2) locating pins are
mounted on the back of the Shape
Air Ring to insure proper alignment.
Step 10
Locate the Splash Plate that is
pressed into the Bell Cup.
Step 11
Insert the narrow end of the Splash
Plate Removal Tool (A11388-00)
into the hole on the back side of the
Bell Cup. Using a hard thrust from
the palm of your hand, remove the
Splash Plate
55
LN-9282-14