Table of Contents
Advertisement
Step 4
Remove the Cup Wash Fitting
from the Shape Air Ring.
When assembling the Cup Wash
Fitting, tighten with fingers until
an audible "click" is heard.
Note: Be careful not to drop the
Cup Wash Ferrule.
Make sure when assembling
the Cup Wash Fitting that the
ferrule taper end is inserted
into the Cup Wash Fitting.
Step 5
Insert the Bell Cup Removal
Tool(A12899) in the hole located
on the Shape Air Ring and align
with the hole in the Turbine Shaft.
LN-9282-14
DISASSEMBLY PROCEDURES
(65mm Bell Cup and Shape Air Ring)
Aerobell 268 - Maintenance
53
Advertisement
Table of Contents
