Table of Contents
Advertisement
OPERATING CHARACTERISTICS AND SPECIFICATIONS
Weight
Voltage
Turbine
Paint
Air Pressure
Change Time
Distance
Compressed Air Quality
Air Consumption
* When measured with Ransburg meter 76652
LN-9282-14
Atomizer (Post Mount 65mm/8 Valves)
Maximum Operating Voltage
Maximum Operating Current
Recommended Turbine Speed
Turbine Type
Speed Readout Pickup
Flow Rate
Normal Supply Pressure
Maximum Pressure
Viscosity
Viscosity
Paint Resistivity
Microvalve Pilot
Bearing Air
Shaping Air
Brake Air
Rotary Atomizer
Bell
Target
Bearing Air
Shaping Air 1
Shaping Air 2
Turbine
Aerobell 268 - Introduction
3.9 kg (8.5 lbs.)
90 kV
80 uA
15 to 60 Krpm
Impulse - Rear Exhaust
Magnetic or Light Source (2 pulse/rev.)
50-500 cm
/min max. (depending on paint)
3
6 to 8 bar (90 psi to 120 psi)
10 bar (150 psi)
20 to 40 Seconds - Ford Cup # 4
20 to 45 Seconds - AFNOR Cup # 4
∞
0.1 MW. to
*
4.9 bar (Min.) - 10 bar (Max.) (75-150 psi)
5.5 bar (Min.) - 7 bar (Max.) (80 - 100 psi)
7 bar Max. (100 psi)
4 bar Min. - 7 bar Max. (60-100 psi)
Less than 5 minutes
Less than 5 minutes
204 - 305mm (8-12 inches)
See Filter Section
57 - 85 slpm (2-3 scfm)
75 to 600 NI/min (2.65-21.2 scfm)
75 to 600 NI/min (2.65-21.2 scfm)
See Charts
14
Advertisement
Table of Contents
