Table of Contents
Advertisement
Aerobell 268 - Maintenance
DISASSEMBLY PROCEDURES
(30mm Bell Cup and Shape Air Ring)
Step 4
Remove the Cup Wash Fitting
from the Shape Air Ring.
When assembling the Cup Wash
Fitting, tighten with fingers until
an audible "click" is heard.
Note: Be careful not to drop the
Cup Wash Ferrule.
Make sure when assembling
the Cup Wash Fitting that the
ferrule taper end is inserted into
the Cup Wash Fitting.
Step 5
Remove Shape Air Ring.
Pull straight off.
Note: The Shape Air Ring is
sealed with a O-ring and may be
difficult to remove.
Note: When reassembling an au-
dible "Click" should be heard.
48
LN-9282-14
Advertisement
Table of Contents
