Stopping The Water Pump - Briggs & Stratton Water Transfer Pump Operator's Manual

Stopping the Water Pump

1. Move engine speed lever to "Slow" (
2. Push on/off switch to "Off" position.
3. Turn fuel valve to "Off" position.
WARNING
Backfire, fire or engine damage could occur.
• DO NOT stop engine by moving choke control to "Choke"
position.
Drain and Flush Water Pump
1. Disconnect and drain suction and discharge hoses.
2. Remove drain plug at bottom of pump.
14
3. Remove primer plug from top of pump and flush
internal components of pump with clean water.
) position.
( )
4. Replace both plugs and finger tighten.
BRIGGSandSTRATTON.COM