c. CALIBRATION
Calibration is a program that corrects the differences between the lever input assemblies of
different c abinets.
Make sure that you run calibration from this screen whenever the control panel or game board
(TRIFORCE) is replaced.
CALIBRATION
P1
P2
UP
40
40
DOWN
C0
C0
LEFT
40 40
RIGHT
C0
C0
Make
sure
that
you
set
up
CALIBRATION
on
a
lever
for
both
"PLAYER
2"
and
"PLAYER
1".
PRESS
TEST
BUTTON
TO
EXIT
Move the P1/P2 lever as far as it will move through 360 degrees around the up, down, left and
right d irections.
The values entered will be corrected and adjusted by the program, which will have an effect on
lever o peration.
● UP:
● DOWN: The maximum input value in the down direction
● LEFT:
● RIGHT: The maximum input value in the right direction
Press the TEST Button to return to the Game Test Menu Screen.
The maximum input value in the up direction
The maximum input value in the left direction
− 32 −