Calibration Test - Sega FORD RACING TWIN-FULL BLOWN Service Manual

10.6. CALIBRATION TEST

This test is used to calibrate the analogue system input devices, i.e. the steering wheel, throttle pedal and brake
pedal.
STEERING LEFT VAL
STEERING LEFT VAL
BRAKE DOWN VAL
BRAKE UP VAL
THROTTLE DOWN VAL
THROTTLE UP VAL
CALIBRATE STEERING
CALIBRATE BRAKE
CALIBRATE THROTTLE
EXIT
The user will use the SERVICE button to select the desired test and the TEST button to activate the test.
The current maximum left position of the steering wheel
The current maximum right position of the steering wheel
The current maximum down position of the brake pedal
The current maximum up position of the brake pedal
The current maximum down position of the throttle pedal
The current maximum up position of the throttle pedal
Starts the steering calibration routine. The user must follow the on screen
prompts to turn the wheel full left and then full right for 5 seconds.
Starts the brake calibration routine The user must follow the on screen
prompts to fully depress and then release the brake pedal for 5 seconds.
Starts the throttle calibration routine. The user must follow the on screen
prompts to fully depress and then release the throttle pedal for 5 seconds.
Exit to System Menu
31