Spare Parts - Astoria Core600 AL Use And Maintenance Manual, Instructions For The User

9.

SPARE PARTS

Machine components and/or parts must be replaced
only by the Maintenance Technician.
The User must not replace the components and/or parts of the
machine.
10.
DECOMMISSIONING
The machine must be decommissioned by the Main-
tenance Technician, because the equipment must be
disconnected from the electricity and water mains, and
all the internal circuits must be emptied of the water.
The commissioning of the machine after this period
must be performed only by the Maintenance Technician.
The User must not perform decommissioning after long time and/
or commissioning of the machine.
11.
DISMANTLING
The dismantling of the machine must be performed
by the Maintenance Technician.
80 288
of
12.
DISPOSAL
Information for disposal
12.1
Only for the European Union and the European Eco-
nomic Area.
This symbol indicates that the product cannot be
disposed of with household waste, according to the
WEEE Directive (2012/19/EC), the Battery Directive
(2006/66/EC) and/or the national laws implementing
those Directives.
The product should be handed over to a designated
collection point, for example the dealer when purchasing
a new similar product, or an authorized collection site
for recycling waste electrical and electronic equipment
(WEEE), as well as batteries and accumulators. Improper
handling of this type of waste can have negative conse-
quences on the environment and human health, due
to potentially hazardous substances that are generally
associated with this kind of waste.
Your cooperation in the correct disposal of this prod-
uct will contribute to the effective usage of natural re-
sources and avoid incurring the administrative sanctions
provided by law. For more information about recycling
this product, contact your local authorities, the body
responsible for waste collection, an authorized dealer,
or your household waste disposal service.
Before disposing of the machine, we recommend seeking advice
from the seller.
Environmental information
12.2
Inside the machine there is a lithium button cell bat-
tery , needed in order to store the machine's data and
located in the circuit board.
Dispose of the battery in accordance with current
national regulations.
USER manual