Cochlear Baha 5 Pairing And Streaming Manual page 8

TV Streamer Pairing
Before You Begin:
Ensure your Cochlear Baha
™
Sound Processor or hearing aid has
a new battery. You may experience
connectivity issues if battery power
is low.
8
1
Plug power cable into TV
Streamer, and plug into
5
®
wall outlet.
2
Turn off either ReSound Hearing
Aid or Baha 5 Sound Processor.
3
Press pairing button on
TV Streamer. Press number
of times (1, 2, or 3) for
channel allocation.
NOTE: The TV Streamer LED
will flash yellow indicating
that pairing mode has been
activated. The number of
flashes indicates the channel
selection. Pairing mode is
active for 20 seconds.
Pushes
1
2
3
or
Light Indicator
Channel
Pattern
1
2
3
4
Turn on ReSound Hearing
Aid. The hearing aid pairing
is successful when the yellow
flashing light on the TV Streamer
turns solid.
5
The yellow light will go back
to flashing when ready for the
Baha 5 Processor pairing.
6
Turn on Baha 5 Sound Processor
by closing the battery door.
or
7
The Baha 5 Sound Processor
pairing is successful when an
audible melody plays in the
sound processor.