Cochlear Baha 5 Pairing And Streaming Manual page 2

Microphone Pairing
Before You Begin:
Ensure microphone is fully charged,
Cochlear Baha Sound Processor
™ ®
has a fresh battery, and hearing
aid has a new battery. You may
experience connectivity issues if
battery power is low.
2
1
Turn off ReSound Hearing Aid
and Baha 5 Sound Processor.
or
2
Turn on microphone.
Turn on
3
Locate and press the round
pairing button on back of the
microphone by the clip. Press
number of times (1, 2, or 3)
for channel allocation.
NOTE: The microphone LED
will flash yellow indicating
that pairing mode has been
activated. The number of
flashes indicates the channel
selection. Pairing mode is
active for 20 seconds.
Light Indicator
Pushes
Pattern
1
2
3
4
Turn on ReSound Hearing
Aid. The hearing aid pairing
is successful when the yellow
flashing light on the microphone
turns solid.
5
The yellow light will go back to
flashing when ready for the
Baha 5 Sound Processor pairing.
6
Turn on Baha 5 Sound Processor
by closing the battery door.
7
Pairing is successful when an
audible melody plays in the
sound processor and hearing aid.
Channel
1
2
3
or