Cochlear Baha 5 Pairing And Streaming Manual page 6

Phone Clip Pairing
Before You Begin:
NOTE: Cochlear
™
Sound Processors
CANNOT be paired
bimodally with the Phone
Clip. The Phone Clip can
only be paired with one
hearing device; Baha 5 Sound
Processor or hearing aid.
Ensure Phone Clip is fully charged
and Baha 5 Sound Processor or
hearing aid has a new battery. You
may experience connectivity issues
if battery power is low.
6
1
Turn off ReSound Hearing Aid.
Baha
®
2
Turn on Phone Clip and remove
silver cap.
3
4
Switch on
Remove cap
Press the white pairing button
on Phone Clip.
NOTE: The Phone Clip LED
will flash yellow indicating
that pairing mode has been
activated. Pairing mode is
active for 20 seconds.
Turn on the Resound Hearing
Aid. The hearing aid pairing
is successful when the yellow
flashing light on the Phone Clip
turns solid.
1
or
Turn off Baha 5 Sound Processor.
or
2
Turn on Phone Clip and remove
silver cap.
Switch on
Remove cap
3
Press the white pairing button
on Phone Clip.
NOTE: The Phone Clip LED
will flash yellow indicating
that pairing mode has been
activated. Pairing mode is
active for 20 seconds.
4
Turn on Baha 5 Sound Processor
by closing the battery door.
or
The Baha 5 Sound Processor pairing
is successful when an audible melody
plays in the sound processor.