M.2 Ssd Module; Removing The M.2 Ssd Module; Installing The M.2 Ssd Module - Dell EMC PowerEdge T440 Installation And Service Manual

M.2 SSD module

Removing the M.2 SSD module

Prerequisites
1. Follow the safety guidelines listed in
2. Follow the procedure listed in
3. Remove the air shroud.
4. Remove the BOSS card.
NOTE: The procedure to remove the BOSS card is similar to the removing an expansion card.
Steps
1. Loosen the screw and lift the retention strap that secures the M.2 SSD module on the BOSS card.
2. Lift the M.2 SSD module and slide it out of the connector on the BOSS card.
Figure 65. Removing the M.2 SSD module
Next steps
Replace the M.2 SSD module.

Installing the M.2 SSD module

Prerequisites
1. Follow the safety guidelines listed in
2. Follow the procedure listed in
3. Remove the air shroud.
4. Remove the BOSS card.
NOTE: The procedure to remove the BOSS card is similar to the removing an expansion card.
78 Installing and removing system components
Safety instructions.
Before working inside your
Safety instructions.
Before working inside your
system.
system.