Dell EMC PowerEdge T440 Installation And Service Manual page 98

Steps
1. Replace the blank information tag in the new control panel with the information tag retained from the old control panel.
Figure 89. Installing the information tag
Figure 90. Installing the control panel assembly
2. To install the information tag, push the information tag into the control-panel slot.
3. Connect the control panel cable and the control panel USB cable to the control panel assembly.
4. Align and insert the control panel into the control panel slot in the chassis.
5. Secure the control panel to the chassis by using the screw.
6. Connect the control panel cable and the control panel USB cable to the system board.
Next steps
1. Follow the procedure listed in
98 Installing and removing system components
After working inside your system.