Status Led Indicators - Dell EMC PowerEdge T440 Installation And Service Manual

Hide thumbs Also See for EMC PowerEdge T440:
Table of Contents

Advertisement

Table 4. Front panel features
Item
Components
4
Information tag
5
USB port 2.0
6
USB port 3.0
7
Optical drive bay
8
Drive slot
9
Physical drives

Status LED indicators

NOTE:
The indicators display solid amber if any error occurs.
Figure 6. Status LED indicators
Table 5. Status LED indicators and descriptions (continued)
Icon
Description
Health indicator
Drive indicator
Icon
Description
N/A
The Information tag is a slide-out label panel that contains system
information such as Service Tag, NIC, MAC address, and so on. If you
have opted for the secure default access to iDRAC, the Information tag
also contains the iDRAC secure default password.
The USB ports are 4-pin, 2.0-compliant. These ports enable you to
connect USB devices to the system.
The USB port is USB 3.0 compliant.
N/A
Enable you to install drives that are supported on your system.
For more information, see the Dell EMC PowerEdge T440 Technical
Specifications on the product documentation page.
N/A
Enables you to install TBUs for 8x and 16x backplane configurations, or
drive blank in the empty drive slot to maintain proper system cooling.
N/A
3.5-inch drives and 2.5-inch drives/SSDs.
Condition
The indicator turns solid blue if the
system is in good health.
The indicator blinks amber, when
the system is:
● Powered on
● In standby
● In any error condition For
example, a failed fan, PSU, or
a drive
The indicator turns solid amber if
there is a drive error.
Corrective action
None required.
Check the System event log or system messages for
the specific issue.
For more information about error messages, see
the Event and Error Message Reference Guide for
14th Generation Dell EMC PowerEdge Servers at
www.dell.com/qrl.
The POST process is interrupted without any video
output due to invalid memory configurations. See
Getting
help.
● Check the System event log to determine if the
drive has an error.
● Run the appropriate Online Diagnostics test.
Restart the system, and run embedded
diagnostics (ePSA.
Dell EMC PowerEdge T440 system overview
15

Advertisement

Table of Contents
loading

Table of Contents