Expansion Card Holder; Removing The Expansion Card Holder; Installing The Expansion Card Holder - Dell EMC PowerEdge T440 Installation And Service Manual

Next steps
1. Follow the procedure listed in
2. While booting, press F2 to enter System Setup and verify that the system detects the USB memory key.

Expansion card holder

Removing the expansion card holder

Prerequisites
1. Follow the safety guidelines listed in
2. Follow the procedure listed in
3. Remove the air shroud.
Steps
Press the tab and remove the expansion-card holder from the chassis.
Figure 59. Removing the expansion card holder
Next steps
1. Install the air shroud.
2. Follow the procedure listed in

Installing the expansion card holder

Prerequisites
1. Follow the safety guidelines listed in
2. Follow the procedure listed in
Steps
Align the expansion card holder with the projections on the chassis and push it down until firmly seated.
After working inside your
Safety instructions.
Before working inside your
After working inside your
Safety instructions.
Before working inside your
system.
system.
system.
system.
Installing and removing system components 73