Extension Voicemail Configuration; Figure 2 : Enable Voicemail - Grandstream Networks UCM6 Series Service Manual

Play Most Recent
First
Allow User Review
Voicemail Remote
Access
Forward Voicemail to
Peered UCMs
Voicemail Password
Format
Note: Resetting an extension will reset Voicemail Password, Send Voicemail to Email, and Keep Voicemail
after Emailing values to default. Previous custom voicemail prompts and messages will be deleted.

Extension Voicemail Configuration

Users can enable Voicemail for an extension under Extensions Settings  Basic Settings for it to be able
to receive voicemails when busy or unavailable.
When skip Voicemail Password Verification is enabled, Users could access to the extension voicemail box
without having to enter their password. This is not recommended.
If enabled, it will play the most recent message first.
If enabled, users can review the message following the IVR before sending.
If enabled, external callers routed by DID and reaching VM will be prompted by
the UCM with 2 options:

Press 1 to leave a message.
To leave a message for the extension reached by DID.

Press 2 to access voicemail management system.
This will allow caller to access any extension VM after entering
extension number and its VM password.
Note: This option applies to inbound call routed by DID only.
The default setting is "Disabled".
Enables the forwarding of voicemail to remote extensions on peered SIP trunks.
The default setting is "Disabled".
Configures the default voicemail password that will be used when an extension
is reset.
Warning: WAV files take up significantly more storage space than GSM files.

Figure 2 : Enable Voicemail

UCM6xxx Voicemail service Guide
P a g e | 7