Product Specifications - Pentair EVERPURE H Series Installation And Operation Manual

Thank you for purchasing an Everpure
water filtration system for your home. With your Everpure
system, you get premium quality water direct from your tap
that' s great-tasting, healthful and convenient for you and your
family.

Product Specifications:

•For Cold Water Use Only
•Temperature Range: 35-100°F (2-38°C)
•Min.-Max. Working Pressure:
10-125 psi (0.7-8.6 bar)
•Service Flow Rate: 0.5 gpm (1.9 Lpm)
THE OWNER'S GUIDE IS APPLICABLE FOR THE FOL-
LOWING EVERPURE FILTER MODELS:
Model H-54 Rated Capacity: 750 gal (2,839 L)
Model H-300 Rated Capacity: 300 gal (1,136 L)
Model H-104 Rated Capacity: 1,000 gal (3,785 L)
Model H-300-HSD Rated Capacity: 300 gal (1,136 L)
Model H-300-NXT Rated Capacity: 300 gal (1,136 L)
Model H-1200 Rated Capacity: 1,000 gal (3,785 L)
For optimum performance, cartridge replacement is
†
required once a year, or sooner if flow becomes too
slow for convenience, or if the unit' s rated capacity is
reached.
For purchase of replaceable components, please contact your local distributor.
H-1200 customers: Instructions for installing the H-1200
begin on page 6 of this Installation and Operation Guide.
commercial-grade
§
†
†
†
†
†
†
The Universal Plumbing Code adopted by over 20
states, and other specific state and county codes, prohibit the
use of saddle valves and their use is never recommended. You
must adhere to your state/local plumbing codes. Consult your
licensed plumber if you have related questions.
Do NOT use copper tubing with the John Guest
Fittings provided with your Everpure Filter System. Copper tubing
may appear to fit, but water leaks will develop over time and use.
If copper tubing is required, you must use copper compression
fittings available from any hardware/plumbing supply.
Multiple Appliance Connections: You can also connect your
Everpure Filter to the refrigerator for ice and water, an instant hot
water dispenser or chiller, or a plumbed-in coffee brewer. Simply
install connection "tees" (available from any hardware/plumbing
supply) in the water line between the filter and the faucet adaptor,
and run new tubing to each appliance.
NOTE: Spent adsorption media will not be regenerated and used.
NOTE: If adsorption media is affected by chlorine, water supply
should be treated to remove chlorine prior to entering filter.
NOTE: DO NOT connect this system to a commercial ice maker.
These appliances require flow and volume beyond the design
limits of your under-sink filter system.
NOTE: If connecting to a home ice maker and there is no filter
faucet connection under the sink, a flush valve is required.
EVERPURE
H-Series Water Filtration Systems
• 3