Table of Contents
Advertisement
SPECIFICATIONS
Pressure Range:
30–125 psi (2.1–8.62 bar)
Temperature Range: 40–100°F (4.4–37.8°C)
Rated Service Flow:
QC10-CBR
0.5 gpm (1.9 Lpm)
QC10-EP
0.5 gpm (1.9 Lpm)
QC10-GAC
0.75 gpm (2.8 Lpm)
QC10-TSGAC
0.75 gpm (2.8 Lpm)
QC10-CGAC*
0.6 gpm (2.3 Lpm)
QC10-CB1*
0.6 gpm (2.3 Lpm)
Size:
2.187-inch x 11.625-inch
(55.5 mm x 295.3 mm)
*Not Performance Tested or Certified by NSF.
PARTS INCLUDED
• Filter head with built-in bracket and compression or
push-fit fittings
• Cartridge
• Hardware kit
TOOLS AND MATERIALS REQUIRED
• Phillips screwdriver
• Adjustable wrench (for 1/4-inch male threaded parts)
• Tape measure
• Pencil
• Safety glasses
• Separate drinking water faucet required if supplying
water directly to the kitchen sink
OPTIONAL MATERIALS
• Shut-off valve
• Saddle tap valve with shut-off
• Threaded copper "T"
• 1/4-inch (6.35 mm) plastic or copper tubing or flexible hose
• 3/8-inch (9.53 mm) plastic or copper tubing or flexible hose
PRODUCT SPECIFICATIONS
Model
Claims
chlorine taste & odor,
QC10-CBR
sediment, lead, atrazine,
lindane, cysts** and turbidity
QC10-EP
chlorine taste & odor
QC10-GAC
chlorine taste & odor
chlorine taste & odor with
QC10-TSGAC
phosphate crystals
chloramine taste & odor and
QC10-CGAC*
chlorine taste & odor*
chlorine taste & odor and
QC10-CB1
sediment*
Turbidity = 5 NTU Max.
*Not Performance Tested or Certified by NSF.
2 • PENTEK
QC10 SERIES Installation and Operation Manual
®
PRECAUTIONS
WARNING:
CAUTION
CAUTION
CAUTION
Rated
Service
Filter Capacity
Flow
500 gallons
0.5 gpm
(1,890 L)
(1.9 L/min)
1,500 gallons
0.5 gpm
(5,670 L)
(1.9 L/min)
2,500 gallons
0.75 gpm
(9,460 L)
(2.8 L/min)
1,700 gallons
0.75 gpm
(6,435 L)
(2.8 L/min)
500 gallons
0.6 gpm
(1,890 L)*
(2.3 L/min)*
10,000 gallons
0.6 gpm
(37,850 L)*
(2.3 L/min)*
**NSF/ANSI Standard 53 certified to reduce cysts such as
Cryptosporidium and Giardia by mechanical means.
Do not use with water that is microbiologically
unsafe or of unknown quality without adequate
disinfection before or after the system.
Protect against freezing to prevent cracking of the
filter and water leakage.
Because of the product's limited service life and to
prevent costly repairs or possible water damage,
we strongly recommend that the head of the filter
be replaced every ten years. If the head of your
filter has been in use for longer than this period,
it should be replaced immediately. Date the top of
any new head to indicate the next recommended
replacement date.
Turn off water supply to head without cartridge if
it must be left unattended for an extended period
of time.
The QC10-CBR is Tested and Certified by NSF
International to NSF/ANSI Standard 42/53.
The QC10-EP is Tested and Certified by NSF
International to NSF/ANSI Standard 42 for the
aesthetic reduction of Chlorine Taste and Odor.
The QC10-GAC is Tested and Certified by NSF
International to NSF/ANSI Standard 42 for the
aesthetic reduction of Chlorine Taste and Odor.
The QC10-TSGAC is Tested and Certified by NSF
International to NSF/ANSI Standard 42 for the
aesthetic reduction of Chlorine Taste and Odor.
1/4-inch
Micron
1/4-inch
JG
Rating
Threaded
Push fit
0.5
158667
158682
5*
158668
158683
–
158669
158684
–
–
158723
–
–
158719
-
–
158721
3/8-inch
JG
Replacement
Push fit
Cartridge
QC10-CBRR
158691
155785-43
QC10-EPR
158692
155962-43
QC10-GACR
158693
155901-43
QC10-TSGACR
158724
255706-43
QC10-CGACR
158720
255704-43
QC10-CB1R
158722
255705-43
Advertisement
Table of Contents
