Product Specifications - Pentair Everpure H-300 Installation Instructions Manual

Thank you for purchasing an Everpure* commercial-grade
water filtration system for your home. With your Everpure
system, you get premium quality water direct from your tap
that's great-tasting, healthful and convenient for you and
your family.

Product Specifications:

•For Cold Water Use Only
•Temperature Range: 35-100°F (2-38°C)
•Min.-Max. Working Pressure:
10-125 psi (0.7-8.6 bar)
•Service Flow Rate: 0.5 gpm (1.9 Lpm)
THE OWNER'S GUIDE IS APPLICABLE FOR THE
FOLLOWING EVERPURE FILTER MODELS:
Model H-54 Rated Capacity: 750 gal (2,839 L)
Model H-300 Rated Capacity: 300 gal (1,136 L)
Model H-104 Rated Capacity: 1,000 gal (3,785 L)
Model H-300-HSD Rated Capacity: 300 gal (1,136 L)
Model H-300-NXT Rated Capacity: 300 gal (1,136 L)
Model H-1200 Rated Capacity: 1,000 gal (3,785 L)
For optimum performance, cartridge replacement is
†
required once a year, or sooner if flow becomes too
slow for convenience, or if the unit's rated capacity
is reached.
For purchase of replaceable components please contact your local distributor.
H-1200 customers: Instructions for installing the H-1200
begin on page 6 of this Installation and Operation Guide.
The Universal Plumbing Code adopted by over 20
states, and other specific state and county codes, prohibit the
use of saddle valves and their use is never recommended. You
must adhere to your state/local plumbing codes. Consult your
licensed plumber if you have related questions.
Do NOT use copper tubing with the John Guest
Fittings provided with your Everpure Filter System. Copper
tubing may appear to fit, but water leaks will develop over time
and use. If copper tubing is required, you must use copper
compression fittings available from any hardware/plumbing
supply.
CALIFORNIA PROPOSITION 65 WARNING
†
This product contains chemicals known to the
†
State of California to cause cancer or birth defects or other
†
reproductive harm.
†
†
Multiple Appliance Connections: You can also connect your
†
Everpure Filter to the refrigerator for ice and water, an instant
hot water dispenser or chiller, or a plumbed-in coffee brewer.
Simply install connection "tees" (available from any hardware/
plumbing supply) in the water line between the filter and the
faucet adaptor, and run new tubing to each appliance.
NOTE: DO NOT connect this system to a commercial ice maker.
These appliances require flow and volume beyond the design
limits of your under-sink filter system.
NOTE: If connecting to a home icemaker and there is no filter
faucet connection under the sink, a flush valve is required.
EVERPURE
H-Series Water Filtration Systems
• 3