Pentair EVERPURE H Series Installation And Operation Manual page 12

EVERPURE
H-300-HSD Cartridge - Part Nos. EV9270-74, EV9270-75
IMPORTANT NOTICE: Read this Performance Data Sheet and
compare the capabilities of this unit with your actual water
treatment needs. It is recommended that, before purchasing a water
treatment unit, you have your water tested to determine your actual
treatment needs.
FEATURES
• For high silt density water vs. standard H-300.
• Finely polishes treated water to premium quality for drinking and
cooking.
• Reduces chlorine taste and odor.
• Reduces dirt, rust and other particulates such as oxidized iron,
manganese, and sulfides.
• NSF/ANSI Standard 53 certified to reduce cysts such as
Cryptosporidium and Giardia by mechanical means.
• Controls even extreme levels of common "off" tastes and odors,
including those which are earthy, moldy and fishy.
• Reduces lead to below the Federal Action Level of 15 ppb.
• Effectively reduces Volatile Organic Chemicals (VOCs).
• Reduces particles as small as 0.5 micron in size by mechanical
means.
HEALTH CLAIM PERFORMANCE CERTIFIED BY NSF/ANSI*
This system has been tested according to NSF/ANSI 42 and 53 for
the reduction of the substances listed below. The concentration of
the indicated substances in water entering the system was reduced
to a concentration less than or equal to the permissible limit for
water leaving the system, as specified in NSF/ANSI 42 and 53.
Influent Challenge Max. Permissible Product
Substance
Concentration Water Concentration
Standard 42—Aesthetic Effects
Chlorine 2.0 mg/L ± 10%
Particulate,
Class I at least 10,000
particles 0.5 particles/mL
to <1 µm
Standard 53—Health Effects
Cyst Minimum 50,000/L
Lead 6.5 0.15 mg/L ± 10%
Lead 8.5 0.15 mg/L ± 10%
Chloroform 0.300 mg/L
(VOC surrogate chemical)
*Tested using flow rate = 0.5 gpm; pressure = 60 psig; pH = 7.5 ± 0.5; temp. = 20° ± 2.5°C
EPA Est. 002623-IL-002
The H-300-HSD is Tested and Certified by NSF
International against CSA B483.1 and NSF/ANSI 42
and 53 for the claims specified on the Performance
Data Sheet.
C US
NOTE: Spent adsorption media will not be regenerated and used.
If adsorption media is affected by chlorine, water supply should be
treated to remove chlorine prior to entering filter.
12 • EVERPURE
H-Series Water Filtration Systems
Reduction Minimum
Requirements Reduction Reduction
≥ 50%
≥ 85%
99.95% 99.99%
0.010 mg/L 99.3%
0.010 mg/L 98.7%
0.015 mg/L 95.8%
PERFORMANCE DATA SHEET
H-300-HSD DRINKING WATER SYSTEM
OPERATING SPECIFICATIONS
• Capacity: 300 gallons (1,135L)
• Pressure requirement: 10-125 psi (0.7 - 8.6 bar), non-shock
• Temperature: 35-100°F (2-38°C)
• Flow Rate: 0.5 gpm (1.9 Lpm)
Performance Data Sheet Reduction Claims
for Organic Chemicals Included by Surrogate Testing
Substance
alachlor
atrazine
benzene
carbofuran
carbon tetrachloride
chlorobenzene
chloropicrin
2,4-D
dibromochloropropane (DBCP)
o-dichlorobenzene
p-dichlorobenzene
1,2-dichloroethane
1,1-dichloroethylene
cis-1,2-dichloroethylene
trans-1,2-dichloroethylene
1,2-dichloropropane
cis-1,3-dichloropropylene
dinoseb
endrin
ethylbenzene
ethylene dibromide (EDB)
haloacetonitriles (HAN):
bromochloroacentonitrile
dibromoacetonitrile
dichloroacetonitrile
trichloroacetonitrile
Average
haloketones (HK):
1,1-dichloro-2-propanone
1,1,1-trichloro-2-propanone
heptachlor
86.8%
heptachlor epoxide
hexachlorobutadiene
98.8%
hexachlorocyclopentadiene
lindane
methoxychlor
pentachlorophenol
99.99%
simazine
99.3%
styrene
1,1,2,2-tetrachloroethane
99.3%
tetrachloroethylene
98.9% toluene
2,4,5-TP(silvex)
tribromoacetic acid
1,2,4-trichlorobenzene
1,1,1-trichloroethane
1,1,2-trichloroethane
trichloroethylene
trihalomethanes (includes):
chloroform (surrogate
chemical)
bromoform
bromodichloromethane
chlorodibromomethane
xylenes (total)
Influent Challenge Maximum permissible Product
Concentration mg/L Water Concentration mg/L
0.050 0.001
0.100 0.003
0.081 0.001
0.190 0.01
0.078 0.0018
0.077 0.001
0.015 0.0002
0.110 0.0017
0.052 0.00002
0.080 0.001
0.040 0.001
0.088 0.0048
0.083 0.001
0.170 0.0005
0.086 0.001
0.080 0.001
0.079 0.001
0.170 0.0002
0.053 0.00059
0.088 0.001
0.044 0.00002
0.022 0.0005
0.024 0.0006
0.0096 0.0002
0.015 0.0003
0.0072 0.0001
0.0082 0.0003
0.080 0.0004
0.0107 0.0002
0.044 0.001
0.060 0.000002
0.055 0.00001
0.050 0.0001
0.096 0.001
0.120 0.004
0.150 0.0005
0.081 0.001
0.081 0.001
0.078 0.001
0.270 0.0016
0.042 0.001
0.160 0.0005
0.084 0.0046
0.050 0.0005
0.180 0.001
0.300 0.015
0.070 0.001