Operation; Prepare Before Use; Energize The Evse; Connect The Evse With The Chargersync App - ABB Terra AC User Manual

Operation

4 Operation
4.1

Prepare before use

1. Appoint a site operator and an installation engineer, if these are other persons
than you.
2. Make sure that the equipment is installed and commissioned according to the
instructions in the installation manual.
3. Make an emergency plan that instructs people what to do in case of an
emergency.
4. Make sure that the space around the equipment cannot get blocked. Think of
snow or other objects. Refer to the space requirements. Refer to section 7.6.3.
5. Make sure that maintenance is done on the equipment. Refer to section 5.
4.2

Energize the EVSE

1. Close the breaker that supplies the power to the EVSE.
•
•
•
4.3

Connect the EVSE with the ChargerSync app

Preliminary requirements
Procedure
1. Find your pin code in the package with the RFID card.
•
•
2. Download the
3. Start the
4. Do the instructions that the
34
Warning:
Hazardous voltage
• Be careful when you work with electricity.
The power supply comes on.
A series of self-checks start, to make sure that the EVSE works correctly and
safely.
If the EVSE detects a problem, the error LED comes on. The
shows the description of the error.
• Mobile device with the
The pin code has 8 characters.
The letters are case-sensitive.
ChargerSync App from the Google Play Store or App Store .
ChargerSync app.
ChargerSync app
ChargerSync app shows.
ChargerSync app
BCM.V3Y00.0-EN | 002