Menu
Charger link connectivity
menu
Add or delete card menu To add or delete RFID cards
2.8.4
Errors
If the EVSE detects a problem, the error LED comes on. The
the error description. For the possible causes and the possible solutions, refer to
section 6.2.
2.9
Description of the display screens (option)
2.9.1
Boot screen
During the start up of the EVSE, the display shows the Boot screen.
2.9.2
Standby/Idle screen
Total :
SN :
C
A
B
C
The display shows the Standby/Idle screen when the EVSE is in idle status. Then,
the EVSE is available for a charge session.
1
It can be necessary to update in multiple steps, until the app does not detect newer firmware.
The app updates one firmware version at a time.
BCM.V3Y00.0-EN | 002
Description
To connect your EVSE to a network
A
325.634,622
30.07.2020 10:30
KWh
TACW2240120G4567
D
Total delivered energy
Date
Guide
B
00.55.19
v
E
D
Serial number
E
Firmware version (MID certified)
Description
ChargerSync app shows
25