Related Manuals for Kargo Master 4081M
Summary of Contents for Kargo Master 4081M
- Page 1 Installation Guide 4081M Kargo Master Rancho Cordova, CA 95742 800-343-7486 CustomerService@KargoMaster.com 20210224R2 DATE: ______________...
-
Page 2: Table Of Contents
Step 4 – Installing Bows ......................7 Before You Begin Read all instructions prior to assembling or installing any Kargo Master product. Follow ladder rack instructions after installing mount feet. These instructions are for mount feet only. -
Page 3: Parts List
Instructions – 4081M Parts For Technical Support Call: 800-343-7486 Monday-Friday 7AM - 4 PM (PST) Page 2... -
Page 4: Hardware List
Instructions – 4081M Hardware For Technical Support Call: 800-343-7486 Monday-Friday 7AM - 4 PM (PST) Page 3... -
Page 5: Step 1 - Front Foot
Instructions – 4081M Step 1 – Front Foot Locate front mount locations as shown above. Remove front most plastic cap in these locations to expose threads in the roof. Place front rail pad over the front most hole. Place small foot (D) on top of pad. -
Page 6: Step 2 - Rear Foot Mount
Instructions – 4081M Step 2 – Rear Foot Mount In the rear of the van, locate the two rear most mounting locations from picture on page 4. Remove plastic to expose both threads in the roof. Place small angle bracket (C) with flange to the center of van. Offset bracket to the front. -
Page 7: Step 3 - Rear Foot To Mount
Instructions – 4081M Step 3 – Rear Foot to Mount The distance between the front and rear foot should be approximately 71.5”. Place the correct large foot (A or B) on top of the angle bracket. The drivers side is shown below. -
Page 8: Step 4 - Installing Bows
Instructions – 4081M Step 4 – Installing Ladder Bows Place correct ladder bow on the previously mounted front and rear feet. Be sure to have equal distance along the bow as shown below. Bolt in place using 3/8” x 3/4” hex head, a 3/8” lock washer and a 3/8” flat washer.